Home › Service Areas › Gig Harbor › Chimney Leak Repair
Chimney Leak Repair in Gig Harbor, WA
Water in the firebox after a storm? Gig Harbor chimney leak repair, across the Narrows, often same-day.
- Serving Gig Harbor & Pierce County
- Free 2nd-opinion quotes
- Price match + 10–25% discount
Free Chimney Leak Repair Quote in Gig Harbor
We'll confirm a time by phone or text.
Most Gig Harbor chimney leaks we trace end at the top of a sided chase. The city is mostly 1990s-2010s construction north of SR 16, and those homes typically have a factory-built fireplace with a galvanized chase cover that has now rusted through at a seam or around the pipe collar. Water runs down the outside of the flue pipe, pools at the bottom of the chase, soaks the framing, and shows up as a wet firebox, a musty smell, or a stain on the wall above the mantel. On the older waterfront and peninsula homes with brick chimneys, the leak is more often a cracked crown, failed flashing or saturated masonry. We water-test from the roof before we fix anything so you pay for the right repair.
Fixes include a stainless chase cover starting at $299, a new storm collar and sealant, step and counter-flashing, a crown rebuild starting at $299, or tuckpointing and water repellent on brick. The quote is free, a second opinion is free, and we price match plus 10-25% off. From Renton it is about 48 minutes across the Tacoma Narrows Bridge, and we are often on the peninsula already, so same-day service is frequently possible. If it leaks again, we're not done.
Symptoms
Signs Gig Harbor homeowners notice
- Water pooling in the firebox or dripping from the damper after rain
- Brown stain on the ceiling or wall beside the chimney that grows during the wet season
- White crusty efflorescence on the brick inside or outside
- Rust streaks down the siding of a framed chimney or down the face of the brick
- Spalling brick faces or crumbling mortar near the top of the chimney
- Damp firebox walls even when it has not rained for a day or two
Gig Harbor Conditions
Why this happens in Gig Harbor
Gig Harbor gets its rain in a long wet block: Sea-Tac normals show about 29.65 inches from October through March, roughly 73% of the 40.34-inch year, with November at 6.31 inches the wettest month. Metal that holds a puddle between storms never dries in those months, which is why galvanized chase covers on the post-1990 homes here fail from the low spot out. Wind off the Sound adds sideways rain that gets under a cover with no drip edge or a storm collar whose sealant has split.
On the masonry chimneys of the waterfront village, the same water soaks brick that then freezes on roughly 60 nights a year with winter lows averaging around 37F. The Brick Industry Association links that freeze-thaw on saturated masonry to cracking and spalling, and moss on the shaded side of a chimney from October to April keeps the joints wet longer.
How It Works
Our chimney leak repair process
Map the symptom
We ask where the water shows up, when, and how long after rain, because each entry point leaves a different signature.
Check the top
Crown, cap and chase cover are inspected first, since they are the most common leak sources and the fastest to rule in or out.
Check the roofline and masonry
Flashing, mortar joints, spalled brick and the flue itself are checked, including for condensation that mimics a leak.
Fix in the right order
We repair the entry points that are actually leaking, from the top down, and leave the sound ones alone.
Water-test and follow up
Where possible we run water on the repair to confirm it is dry, and if the next storm proves us wrong, we come back at no charge.
Full details, options and pricing factors on the main Chimney Leak Repair page.
Need chimney leak repair in Gig Harbor?
Call now or request a free quote — we confirm by phone or text.
☎ 206-453-2045 Request a QuoteQuestions
Chimney Leak Repair in Gig Harbor — FAQ
Our Gig Harbor fireplace is gas and the firebox gets wet after storms. Is that a chimney leak?
Usually yes. A rusted chase cover or a split storm collar lets water follow the flue pipe down into the firebox. We replace the cover and reseal the collar. We do not work on the gas burner or valve; if the unit was wet, have a gas technician check it before relighting. Our part is stopping the water, with a free quote first.
How do you find the leak when it only happens in heavy wind off the water?
We spray the chimney from the roof, starting low and working up, from the direction your storms come from, while someone watches inside. Wind-driven leaks usually show at the storm collar, under the cover lip, or at the top of the counter-flashing. Once we see water, we stop and fix that spot. That test is part of the free quote visit.
How soon can you do chimney leak repair in Gig Harbor?
We confirm a time by phone or text after you request a quote; same-day service is often available for urgent problems in Gig Harbor and the rest of Pierce County.
Other services in Gig Harbor
Chimney Leak Repair nearby