Home › Service Areas › Redmond › Chimney Sweep
Chimney Sweep in Redmond, WA
Routine creosote removal for Redmond's wood-burning fireplaces. Sweep & inspection starting at $299, scheduled around your workday.
- Serving Redmond & King County
- Free 2nd-opinion quotes
- Price match + 10–25% discount
Free Chimney Sweep Quote in Redmond
We'll confirm a time by phone or text.
A chimney sweep in Redmond is mostly a prefab job. With a median build year of 1993, the city's fireplaces are predominantly factory-built units venting through metal pipe inside a framed chase, and those flues collect creosote just like a brick flue does. We sweep the full run from firebox to cap with rods and brushes sized for the pipe, clear the spark screen in the cap, and vacuum the firebox and the area around the refractory panels. In the older Redmond core and Grass Lawn, we sweep clay-tile-lined brick flues the same way, with a brush sized for the tile and attention to the smoke shelf and damper.
Every sweep includes a visual inspection of what we can see from the firebox and the top, and we photograph anything that needs attention. Sweep & inspection starts at $299, the quote is always free, and we price match any written quote plus 10–25% off. Redmond homeowners tend to be on a tight weekday schedule, so we book firm arrival windows and often have same-day openings. Not happy with the job? We're not done until you are.
Symptoms
Signs Redmond homeowners notice
- Black, flaky or shiny tar-like buildup visible inside the firebox or on the damper
- Smoke rolling back into the room when the fire is going
- A smoky campfire smell in the house when the fireplace is not in use
- The fire is hard to start or burns sluggishly even with dry wood
- Soot falling onto the smoke shelf or hearth after a fire
- A full burning season has passed since the last sweep
Redmond Conditions
Why this happens in Redmond
Redmond fireplaces see light, seasonal use, which is its own creosote problem. The burning season here follows the rain: about 73% of the region's 40.34 inches falls October through March, and that is when most Redmond households light the fireplace, a few evenings a week, often with wood stored outside through the wettest stretch (November averages 6.31 inches). Short, cool fires with damp fuel typically leave more sticky creosote than a hot, steady burn.
In prefab systems the narrow pipe and the cap screen also plug with soot faster than a big masonry flue, and a plugged screen pushes smoke back into the room. Because the homes are newer, many Redmond owners assume the chimney has never needed sweeping. NFPA 211 recommends an annual inspection of any chimney in use regardless of age, and a sweep whenever deposits are found.
How It Works
Our chimney sweep process
Protect the room
Drop cloths from the door to the hearth, a sealed fireplace opening, and a HEPA vacuum running the whole time so dust stays out of your living room.
Inspect first
A visual check of the firebox, damper, smoke chamber and flue confirms a routine sweep is the right service.
Sweep the flue
We run brushes sized to your chimney, from the firebox up or from the top down depending on the system, to knock creosote and soot off the flue walls.
Clean the smoke chamber, shelf and damper
The smoke shelf collects most of the loose fall; we brush and vacuum it and the smoke chamber, then brush the damper so it seats properly.
Final check and walkthrough
We look up the flue again, vacuum the firebox, and show you what came out. Anything we noted, such as cracks or a missing cap, gets a free written quote.
Full details, options and pricing factors on the main Chimney Sweep page.
Need chimney sweep in Redmond?
Call now or request a free quote — we confirm by phone or text.
☎ 206-453-2045 Request a QuoteQuestions
Chimney Sweep in Redmond — FAQ
Our Redmond home is from the 2000s. Does a newer prefab chimney really need sweeping?
Yes. Age doesn't matter; creosote comes from burning wood, and a factory-built flue collects it the same as brick. Prefab caps also have screens that clog with soot and block draft. NFPA 211 recommends an annual inspection for every chimney in use, and we sweep whenever we find buildup. Sweep & inspection starts at $299 in Redmond.
Can you sweep without making a mess in a townhouse?
That's the standard for every Redmond sweep. We lay drop cloths, seal the firebox opening, and run a HEPA vacuum the whole time brushes are moving, so soot stays in the flue and our equipment. Shared-wall townhomes on Education Hill and in Overlake are routine for us. If anything about the job isn't right, we come back and fix it at no charge.
How soon can you do chimney sweep in Redmond?
We confirm a time by phone or text after you request a quote; same-day service is often available for urgent problems in Redmond and the rest of King County.
Other services in Redmond
Chimney Sweep nearby