Home › Service Areas › Sumner › Chimney Repair
Chimney Repair in Sumner, WA
Brick, mortar and prefab chimney repair for Sumner's historic downtown and the plats east of SR 410. Free quote, price match.
- Serving Sumner & Pierce County
- Free 2nd-opinion quotes
- Price match + 10–25% discount
Free Chimney Repair Quote in Sumner
We'll confirm a time by phone or text.
Sumner has one of the older downtowns in the Puyallup valley, and the homes on the grid around Main Street and near the Sounder station typically carry tall brick chimneys that are a century or close to it. Those chimneys were usually built with soft lime-based mortar and no liner, and the typical repair work is tuckpointing eroded joints, replacing spalled brick near the top, and rebuilding crowns that were never more than a mortar wash. East of SR 410 and up toward the Lake Tapps side of town, the 1990s-and-later subdivisions typically have factory-built fireplaces in framed chases, where the repairs are rusted chase covers, loose storm collars and rotted chase framing.
We handle both kinds. Crown rebuilds start at $299, chase covers start at $299, chase rebuilds start at $299 and fireplace crack repair starts at $299. Sumner is about 35 minutes from our Renton office down SR 167 and SR 410, and we often combine it with Puyallup and Bonney Lake stops, so same-day service is frequently possible. Every job begins with a free quote, and we offer a free second-opinion quote if you already have one in hand. If you are not happy, we are not done.
Symptoms
Signs Sumner homeowners notice
- Water stains or bubbling paint on the ceiling or wall next to the fireplace
- Rust-colored streaks running down siding or brick below the top of the chimney
- Chips of brick, mortar, or concrete in the gutter or on the ground
- Visible cracks in the concrete slab at the top of the chimney
- A chimney that leans, or a gap opening between the chimney and the house
- Smoky or musty smells from the fireplace when it is not in use
Sumner Conditions
Why this happens in Sumner
Sumner sits where the White River meets the Puyallup, and the valley floor holds moisture. The region sees 40.34 inches of rain a year by the Sea-Tac 1991-2020 normals, with November the wettest month at 6.31 inches. Old unlined brick chimneys downtown absorb that water through open joints, and the Brick Industry Association notes that improperly filled mortar joints lead directly to water penetration, cracking and disintegration.
Freeze-thaw finishes the job. Winter lows in the region average 37 to 38F, and the area touches freezing on about 60 days a year while rarely staying frozen all day, which means wet brick on a downtown Sumner chimney freezes and thaws repeatedly every winter. Those chimneys also tend to be tall, rising above steep roofs, so the upper courses catch wind-driven rain from every direction. Most of the spalling and loose brick we repair in Sumner is in those top few feet.
How It Works
Our chimney repair process
Free quote visit
We inspect the chimney top to bottom, photograph what we find, and hand you a written quote. If you have another company's quote, we review it with you.
Diagnose the entry point
We identify which component is actually letting water, smoke, or heat through, instead of replacing parts on guesswork.
Repair in the right order
Top components come first so the structure dries out, then masonry, then the firebox.
Same-day work when possible
Many crown, cap, cover, and flashing repairs are done on the first visit. Masonry and chase rebuilds are scheduled for a dry window.
Walk-through and guarantee
We show you photos of the finished work. If you are not happy, we are not done, and we re-do it at no charge.
Full details, options and pricing factors on the main Chimney Repair page.
Need chimney repair in Sumner?
Call now or request a free quote — we confirm by phone or text.
☎ 206-453-2045 Request a QuoteQuestions
Chimney Repair in Sumner — FAQ
My downtown Sumner house is old. Can the original brick chimney be saved?
Usually, yes. Most century-old Sumner chimneys are structurally fine below the roofline; the damage is concentrated in the exposed top courses and the crown. We repoint with a mortar matched to the soft original brick, replace only the spalled units, and rebuild the crown. The free quote shows exactly how much of the chimney needs work.
Do you repair prefab chimneys in the newer Sumner subdivisions?
Yes. The plats east of SR 410 and toward Lake Tapps typically have factory-built fireplaces with framed chases, and the common repairs there are a rusted chase cover starting at $299, a failed storm collar, or rotted chase framing, which we rebuild starting at $299. We check all three on every visit.
How soon can you do chimney repair in Sumner?
We confirm a time by phone or text after you request a quote; same-day service is often available for urgent problems in Sumner and the rest of Pierce County.
Other services in Sumner
Chimney Repair nearby